POE INJECTOR AND POWER SUPPLY, WALL MOUNT, 48VDC/0.5A OUT

Description

The Pro-Elec 48V Power-over-Ethernet (PoE) Passive Midspan Injector provides DC power for one PoE-equipped device by injecting regulated, low-ripple, DC power through a Cat5e cable. Compatible with the IEEE 802.3af-2003 (802.3at Type 1) standard, and supporting 10/100 based Ethernet transmission, the Pro-Elec Injector is ideal for use in applications such as Wireless LAN access point the bridge connectivity, WiFi amplifiers, VoIP telephones and IP surveillance cameras. The all-in-one, self-contained injector and power supply features built-in over-voltage, overcurrent and short circuit protection, and is housed in a durable, impact-resistant, wall mount design.

Details and Specifications

• IEEE 802.3af-2003 (802.3at Type 1)
• Input Voltage Range: 100VAC~240VAC
• Output Voltage: 48VDC
• Input Frequency Range: 47Hz~63Hz
• Rated Input Frequency: 50Hz/60Hz
• Input Current: 0.3A max.
• Output Current: 0.5A max.
• Output Power: 24W
• Efficiency: Level VI
• Max cable resistance: 20ohms

• Supported modes: ModeA (endspan), ModeB (midspan)
• Connectors: (2) RJ45 Jacks
• Data Lines: Pair 1-pins 1&2; Pair 2-pins 3&6
• Cat5 Power Pinout: +VDC: pins 4&5; -VDC: pins 7&8
• Transmission Distance: up to 100m
• Certifications: CE, UL, FCC, RoHS, CB, C-TICK, EN60950, PSE (J60950), SAA (AS/NZS 60950)
• Dimensions: L83.5mm x W47mm x H31.0mm