This product is out of stock.
The FlipToggle supplies extra holding power in drywall / masonry material with its strong toggling mechanism. Easy and fast to install, this product provides extra strength in thicker wall material. This simple mechanism ensures perfect installation every time.
Twice as strong as the regular toggle bolt with same bolt diameter, the FlipToggle requires only 1/2” hole and can be used with any bolt length. The flipping action combined with the tilting of its metal toggle offers a trouble-free installation and the toggle will never fall behind the wall.
2X stronger than regular toggle wings for same bolt diameter.
Requires a smaller hole, a shorter bolt and the toggle will never fall behind the wall.
Installs with a screw gun for fast and easy installation. No need to pull back on the bolt anymore.
New, simple, one strap design to hold the toggle perfectly vertical for easy insertion and flipping operation.
Tools required:
Drill
Screwdriver
Applications:
Bathroom fixtures
Decorations on doors
Electrical boxes
Flat Screen TVs
Kitchen cabinets
Mirrors
Picture frames
Wall decorations
Installation instructions:
Drill the appropriate size hole. Flip the head of the Fliptoggle in order for it to be in line and secured onto the strap.
Insert the Fliptoggle into the drilled hole. When completely inserted, pull the strap which will flip the toggle flat against the back of the wall.
Push the cap into the drilled hole until flush with the wall, and then hold the cap against the wall while pulling the strap towards you until reasonably tight.
Bend to snap off the excess of the strap flush with the wall. Insert the bolt through the fixture, into the anchor and tighten securely.
